When doing a home improvement task, it is recommended that you contact experts. Unless you have the skills and experience to take on a home improvement task, never attempt to do things on your own. There are a lot of home improvement tasks that you really have to assign to professionals. One of them is tiling. It is not a job for newbies because it might lead to costly mistakes. However, if you want to learn how to tile your floors, start with a small area for you to practice. Make sure you ask experts in tiling Queenstown has today to ensure you are doing the right thing.
You can also take a look at these steps below to help you get started with your tiling project. If you have problems tiling your floors, make sure you have a reliable expert tiling in Queenstown to help you out.
1. Make Sure to Level the Floor. Experts in tiling Melbourne has today levels the floor first before doing any tiling. No matter how flat your floor looks, you want to ensure that it is leveled or really flat. If it’s not, you might have a problem walking on a tile that is a little higher than the other, causing you to stumble. However, it still depends on the type of floor you want to tile. If you are tiling a bathroom, the floor needs to be angled toward the drain.
2. Prepare Important Tools. When it comes to tiling Queenstown has today, it is important that you use the proper tools. You will definitely be doing a lot of kneeling when you put the tiles together. Take note of these tools that Queenstown tiling experts recommend:
  • Drill. This is important so you can mix the mud needed for the tiles to adhere to the floor. It is recommended to use a cordless drill for an easy and mess-free mixing. Click here for Designa
  • Kneepads. As mentioned, you will do a lot of kneeling during the tiling process. Make sure to protect your knees with kneepads. It’s okay if you won’t look your best while tiling. It is definitely better than kneeling on your knees especially if you have a large floor area you need to cover.
  • Tile Saw. There are cases when there is not enough space for the tiles to fit. You need a tile saw to cut your tiles to the desired length. A high-quality wet cutting tile saw is mostly recommended by tiling Queenstown experts.
  • Trowels. It is important that you use the right trowel size. This will typically depend on the size of the tile you plan to use. Trowels are used to spread tile adhesive on the floor. You want to ensure that you have enough adhesive for your tiles to stick appropriately.
3. Use Waterproof Crack Isolation Membrane. There are various brands you can use to protect the floors from cracks and keep it waterproof. Although your tiles don’t move once it is installed, the things around them do. That is why it is important that you also protect your floors so your tiles will not suffer damage in the long run.
4. Plan the Layout Ahead. You want to ensure that the tiles are laid properly in a tidy manner. Most experts in tiling Melbourne has today suggested that the first row should be similar to the last row of your tiles. That is why you need to plan ahead especially if you have a bit complicated floor area.
5. Thinset Mix. You have to ensure that the mixture is as thick as a peanut butter. Using a notched trowel, the thinset should flow but still stand up. Make sure to test the thickness to ensure that the tile adheres properly to the standing seam of thinset. If the mixture is too watery, you might have a problem sticking the tiles.
The abovementioned are just a few of the many helpful tips on how you can install tiles. If you think that the project is too complicated for you to achieve, never hesitate to call professionals for best tiling Queenstown has to offer. You can also visit http://www.designatilesqt.co.nz/ for more details.